While regular cleaning is very important to maintenance so is the maintenance of the  major systems of your home .

To care for your gutters here are some tips

-  Paint your gutters about every 6 years to ward off rust and prevent damage from rust. If you have vinyl or aluminum gutters on your home you will not need to worry about this step.

-  Regularly clean out your gutters. You want to make sure you get any leaves, trash, or buildup out of them to keep them working their best.

-  Make sure your downspout is not pointing towards your homes foundation. It is very important it is facing away from your homes foundation to prevent and water or mold damage.

To care for your heating and cooling units here are some great tips

-  Clean out or swap out your air filters every 3 months. This is a great habit to make.

-  Close registers in rooms you don’t use or use often. This can provide some real savings and will prevent the units from working harder to heat or cool unused areas in the home.

-  Have your units inspected by a professional heating and air conditioning company and the beginning of winter and spring/summer.

To care for your homes plumbing here are some great tips

-  Keep drains unclogged and snake them every few months.

-  If you notice you have a noisy pipe when a faucet is on that is usually sign of a loose or worn washer. This can lead to leaks. Fix or replace the washer right away.

-  If you notice a leak of any kind call a plumber immediately.

Making repairs to appliances will save you money because you will not be rushing out to purchase a brand new appliance. Repairing is also good for the environment. Many people do not dispose of or trash their old appliances correctly and by repairing an appliance, that leaves 1 less appliance to sit in a landfill. Whether your broken appliance is a refrigerator, stove, oven, microwave, washer or dryer you can call for service on it.  There are skilled and qualified repair companies all over the country. In the Las Vegas Area At’Cher Service is an ideal choice. A repair technician will come out to your home and assess the problem with your appliance. Many times it is a part that needs replacing. The technician will repair the appliance and replace the necessary part. It is also a great idea to ask the technician for maintenance tips for the appliance in question and how you can keep the appliance in good working order as long as possible.

When repairing your electric cooktop you will need, wire caps, screwdrivers, and a multimeter. You are able to pick these items up from a hardware store.

First you will need to determine if the appliance is plugged in. Then check the panel. Check that the outlet is working properly. Test the switches. You are able to replace switches and control panels easily if that is the problem.

To check if the burners are causing the problem, disconnect the power from the range. Remove the burner and inspect the part for burn marks or holes or damage that has formed, if burn marks, holes, or damage is present replace the burner. If you see buildup on the part, clean it with steel wool until all buildup is removed. Plug the burner back in and see if starts heating up and working. Disconnect the unit again and select a wire to test using a multimeter. Test the probe of each receptacle and switch. They should all show continuity in electricity.  If any of the burners fail this test they will need to be replaced with new ones.

Repairing an electric stove is not a task a novice do it yourselfer should undertake. If you are not skilled in electrical and appliance repairs it is recommended you contact a professional.

Let’s do it! First of all, you are required to locate your fuse. They are usually an inch or two long. Each end is metallic and the center is either ceramic or glass. To get to the fuse, remove the outer cabinet of the unit, which is usually held in place with a few screws. Once the outer cabinet is removed, follow the power cord into the unit. It will take you to the fuse holder, where the fuse sits. The fuse holder is located two or three inches into the unit, and may be attached to a power board. Decide if your fuse is blown. A blown glass fuse will produce flash burn marks on nearby surfaces, or it will be completely black on the inside. The internal fuse wire (filament) will be melted and blackened. Ceramic fuses give no outward signs of having blown. To determine if a ceramic fuse is blown, test it with an ohmmeter. If the ohmmeter reads zero ohms, your fuse is fine. A reading of infinite ohms means your fuse is blown.

Replace the blown fuse. Pop it out of its holder and snap in a new one. You can squeeze the fuse clips together with your fingers in order to tighten their grip. Replace the unit’s outer cabinet, plug it back in, and test to see if it is running properly. Do not run the microwave with nothing in it. Remember here that fuses do not usually blow on their own. A fuse may blow because of problems with the interlock switches or with high voltage circuitry. It is also possible, though rare, that a power surge will cause a fuse to blow.

First of all, it is recommended to try setting your thermostat between 72°F and 78°F. Each degree setting below 78°F will increase your energy consumption by approximately 8%. As you can see, that can add up to a lot of money over a year. Next, you should never forget to inspect and clean both the indoor and outdoor AC/Heating coils. The indoor coil in your air conditioner acts as a magnet for dust because it is constantly accumulating moisture during the cooling season. Dirt build-up on the indoor coil is the single most common cause of poor efficiency. The outdoor coil must also be checked periodically for dirt build-up and cleaned if necessary.

Furthermore, check the refrigerant charge. The circulating fluid in your air conditioner is a special refrigerant gas that is put in when the system is installed. If the system is overcharged or undercharged with refrigerant, it will not work properly. You may need a service contractor to check the fluid and adjust it appropriately. Remember to use bath and kitchen fans sparsely when you are running the air conditioning system. Now, reduce the cooling load by using cost-effective conservation measures. For example, effectively shade east and west facing windows. When possible, delay heat-generating activities, such as dishwashing or baking, until the evening on hot days. Remember that you should never try to use a dehumidifier at the same time your air conditioner is operating. The dehumidifier will increase the cooling load and force the air conditioner to work harder, which in turn increases your utility bill.Over most of the cooling season, keep the house closed tight during the day. Don’t let in unwanted heat and humidity. If practical, ventilate at night either naturally or with fans.

Refrigerators and freezers consist of two basic components: a condenser coil and an evaporator coil. A liquid coolant is circulated through these coils by a compressor and a motor. The refrigerant liquid is cooled in the condenser; it then flows to the evaporator. At the evaporator, the air in the unit is cooled by contact with the liquid-filled coil. The condenser of a refrigerator or freezer is the coil on the outside of the unit; the evaporator is the coil on the inside. The coolant is circulated through the system by a compressor.

Most refrigerators and freezers are frost-free. In this type of unit, a heater is automatically turned on by a timer in order to melt the frost inside the unit. Frost is melted by the heater at several different spots in the unit, starting with the coldest and most frosted areas. When the frost is completely melted, the thermostat automatically switches to a cooling cycle in order to maintain the standard freezing temperature. Because this process is automatic, frost does not build up inside the box.

The unit’s compressor system, which forces the coolant through the coil system, is driven by a capacitor-type motor. Other basic parts of the cooling/defrosting system include switches, thermostats, heaters, condensers, and fans. If you are experiencing malfunction with your refrigerator a do-it-yourselfer can test and replace many of these refrigerator components. However, it is best to call a professional or refrigerator repair las vegas to service your refrigerator when it is not working properly.